STARING ST PROTECTION PLATE

STARING leveling system in 100% recycled plastic prevents uneven surfaces when installing large tiles. The patented design allows the leveling cap to automatically rotate on the leveling screw with minimal effort, making it possible to tighten and adjust the leveling cap with just one hand.

The leveling system can be quickly installed without the use of tools and with high precision. The system consists of two parts, the leveling screw and the leveling cap. A protective cap can be purchased separately. Both the cap and protective cap can be reused for multiple tasks.

Leveling Caps: Used in conjunction with STARING Leveling Screws for floor and wall tiles with a thickness of up to 15 mm and only a 1.0 or 1.8 mm joint width. The screw is placed beneath the tile and can be manually turned onto the leveling screw until the tiles are level with each other. They can be adjusted as needed without the use of tools. The caps are reusable.

Leveling Screws: Nylon leveling screws used in conjunction with STARING leveling caps for floor and wall tiles with a thickness of up to 15 mm and only a 1.0 or 1.8 mm joint width. The screw is placed beneath the tile and does not require the use of tools. After the grout has dried, the screws are snapped off in the direction of the joint.

There are two versions of the screw available: 1.0mm Leveling Screw 1.8mm Leveling Screw