STARING ST LEVELING 1,0 MM

The STARING leveling system is made from 100% recycled plastic and is designed to prevent uneven surfaces when installing large tiles. Its patented design allows the leveling cap to rotate automatically on the leveling screw with minimal effort, making it possible to tighten and adjust the leveling cap with just one hand.

The assembly of the leveling system is quick and easy, without the need for tools. It consists of two parts – the leveling screw and the leveling cap – which can be reused for multiple tasks. Protective caps can also be purchased separately.

The leveling caps are used together with STARING Leveling Screws for floor and wall tiles with a thickness of up to 15 mm and a joint width of only 1.0 or 1.8 mm. The screw is placed under the tile and manually screwed onto the leveling screw until the tiles are level with each other. The caps can be adjusted as needed, without the use of tools, and are reusable.

The leveling screws are made of nylon and are used together with STARING leveling caps. They are suitable for floor and wall tiles with a thickness of up to 15 mm and a joint width of only 1.0 or 1.8 mm. The screw is placed under the tile and can be installed without the use of tools. Once the grout has dried, the screws can be snapped off in the direction of the joint with a rubber mallet.